Identification of transport processes in column experiments using a frequency domain approach

When a solute transport process is viewed as a dynamic system with input and output, a system identification technique can be used to study it from input-output data. According to the design of excitation signals in the system identification approach, the commonly used rectangular pulse as input signal for column experiments is not optimum because it does not simultaneously meet the requirements for exciting the studied transport process, i.e., possessing frequency components with high enough amplitude and wide enough passband. In this article, stepped sine signals were proposed to replace the rectangular pulse because their amplitude and passband can be independently chosen. The stepped sine signals of concentration were generated by a High Performance Liquid Chromatography (HPLC) and used as the input for the column experiments to identify parameters of the convection-dispersion equation (CDE) and mobile-immobile model (MIM). In order to test the effect of noise on the identification of transport process, numerical experiments were carried out to identify the CDE under white noise when the input was designed as stepped sine functions and rectangular pulse. The results of the numerical experiments showed that the input signal of a sine function was more robust and accurate in process identification than that of a rectangular pulse.     

Laboratory and field evaluation of crystallized DOW 704 oil on the performance of the Well Impactor Ninety-Six fFine particulate matter fractionator

Subsequent to the 1997 promulgation of the Federal Reference Method (FRM) for monitoring fine particulate matter (PM2.5) in ambient air, U.S. Environmental Protection Agency (EPA) received reports that the DOW 704 diffusion oil used in the method's Well Impactor Ninety-Six (WINS) fractionator would occasionally crystallize during field use, particularly under wintertime conditions. Although the frequency of occurrence on a nationwide basis was low, uncertainties existed as to whether crystallization of the DOW 704 oil may adversely affect a sampling event's data quality. In response to these concerns, EPA and the State of Connecticut Department of Environmental Protection jointly conducted a series of specialized tests to determine whether crystallized oil adversely affected the performance of the WINS fractionator. In the laboratory, an experimental setup used dry ice to artificially induce crystallization of the diffusion oil under controlled conditions. Using primary polystyrene latex calibration aerosols, standard size-selective performance tests of the WINS fractionator showed that neither the position nor the shape of the WINS particle size fractionation curve was substantially influenced by the crystallization of the DOW 704 oil. No large particle bounce from the crystallized impaction surface was observed. During wintertime field tests, crystallization of the DOW 704 oil did not adversely affect measured PM2.5 concentrations. Regression of measurements with crystallized DOW 704 versus liquid dioctyl sebacate (DOS) oil produced slope, intercept, and R2 values of 0.98, 0.1, and 0.997 microg/m3, respectively. Additional field tests validated the use of DOS as an effective impaction substrate. As a result of these laboratory and field tests, DOS oil has been approved by EPA as a substitute for DOW 704 oil. Since the field deployment of DOS oil in 2001, users of this alternative oil have not reported any operational problems associated with its use in the PM2.5 FRM. Limited field evaluation of the BGI very sharp cut cyclone indicates that it provides a viable alternative to the WINS fractionator.     

Use of selected waste materials in concrete mixes

A modern lifestyle, alongside the advancement of technology has led to an increase in the amount and type of waste being generated, leading to a waste disposal crisis. This study tackles the problem of the waste that is generated from construction fields, such as demolished concrete, glass, and plastic. In order to dispose of or at least reduce the accumulation of certain kinds of waste, it has been suggested to reuse some of these waste materials to substitute a percentage of the primary materials used in the ordinary portland cement concrete (OPC). The waste materials considered to be recycled in this study consist of glass, plastics, and demolished concrete. Such recycling not only helps conserve natural resources, but also helps solve a growing waste disposal crisis. Ground plastics and glass were used to replace up to 20% of fine aggregates in concrete mixes, while crushed concrete was used to replace up to 20% of coarse aggregates. To evaluate these replacements on the properties of the OPC mixes, a number of laboratory tests were carried out. These tests included workability, unit weight, compressive strength, flexural strength, and indirect tensile strength (splitting). The main findings of this investigation revealed that the three types of waste materials could be reused successfully as partial substitutes for sand or coarse aggregates in concrete mixtures.     

Supporting breastfeeding in emergencies: protecting women's reproductive rights and maternal and infant health

Women have the right to support that enables them to breastfeed. Supporting breastfeeding in emergencies is important because artificial feeding places mothers and children at risk. In emergencies, artificial feeding is dangerous to the infant, difficult and requires substantial resources. In contrast, breastfeeding guards infant health. It is also protective against postpartum haemorrhage, maternal depletion, maternal anaemia and closely spaced births and should therefore concern not only nutritionists, but also those involved in reproductive health. However, it is common for women's ability to breastfeed to be undermined in emergencies by the indiscriminate distribution of breast-milk substitutes and the absence of breastfeeding support. Controlling the distribution of breast-milk substitutes, providing supportive environments, and appropriate medical and practical assistance to breastfeeding women safeguards the health and well-being of mothers and babies. Greater collaboration between the nutrition and reproductive health sectors is required to promote best practice in protecting breastfeeding women and their children in emergencies.     

Community engagement as a component of revitalization: Lessons learned from the Technical Outreach Services to Communities programme

Community involvement has been identified as an important factor in the successful redevelopment of contaminated land, and access to technical resources has been a barrier for some communities. This paper describes how the US Environmental Protection Agency funded Technical Outreach Services to Communities programme was used to support four communities involved in land revitalization. The four New England case studies were used to retrospectively draw lessons learned that could be useful to others interested in similar community work. We suggest that the broad lessons point to four factors for success, namely, where there is: (1) a common vision in the community; (2) a cohesive community; (3) an opportunity for co-learning; and (4) a commitment among the parties for long-term engagement. We conclude that technical support can serve as a useful framework for developing trustful and long-term relationships with communities.     

Sulfur Metabolism in Polluted Sphagnum Peat Bogs: A Combined 34S–35S–210Pb Study

The size and isotopic behavior of sulfur pools in²¹⁰Pb-dated peat cores were investigated to obtain aninsight into retention mechanisms of pollutant S in twomountain-top peatlands of the Northern Czech Republic, CentralEurope. The bogs were situated 40 km apart in an area whichbetween the years 1985 and 1995 received as much as 130 kg Sha^-1 yr^-1 from the atmosphere. Vertical peataccretion was faster at Pod Jelení horou (JH) than atVelký moál (VM). Organic carbon-bonded S was themost abundant sulfur pool, constituting 77 and 65 wt. % at JHand VM, respectively. At JH both the S concentration maximumand the highest annual S deposition rate were displaceddownward by more than 20 years (from 1987 to the 1960s)indicating that the buried S is vertically mobile. At VM the Sconcentration was the highest in the topmost 2-cm section eventhough atmospheric S deposition peaked in 1987. Differentmechanisms of S isotope redistribution prevailed in thetopmost peat layers at JH, where a negative ³⁴Sshift occurred, and at VM, where a positive ³⁴Sshift occurred. Bacterial sulfate reduction was responsiblefor the negative ³⁴S shift at JH. One possibleexplanation of the positive ³⁴S shift at VM isrelease of ³²S-enriched products of mineralization duringpeat diagenesis. There was a strong positive correlationbetween the abundance of total and pyrite S along the profiles.The presence of pyrite S at VM (526 ± 60 ppm) suggestedthat even at VM bacterial sulfate reduction occurred. Ananaerobic incubation of JH peat indicated sulfate reductionrate of 600 nmol g^-1 day^-1. The turnover times forinorganic S pools were shorter than for the organic S pools.Cumulative S contents in the Czech peat bogs were found to besignificantly lower than in similar sites in the NortheasternU.S., even though the atmospheric S inputs were more thanthree times higher at the Czech sites. Possible causes of suchdiscrepancy are discussed.     

Assessing Biological Integrity Using Freshwater Fish and Decapod Habitat Selection Functions

Comparison between the number of taxa observed and the number expected in the absence of human impact is an easily understood and ecologically meaningful measure of biological integrity. This approach has been successfully applied to the assessment of the biological quality of flowing water sites using macroinvertebrates with the river invertebrate and classification system (RIVPACS) and its derivatives. In this paper, we develop a method similar to the RIVPACS predictive model approach to assess biological integrity at flowing-water sites using freshwater fish and decapod assemblages. We extend the RIVPACS approach by avoiding the biotic classification step and model each of the individual species separately. These assemblages were sampled at 118 least impacted (reference) sites in the Auckland region, New Zealand. Individual discriminant models based on the presence or absence of the 12 most common fish and decapod species were developed. Using the models, predictions were made using environmental measures at new sites to yield the probability of the capture of each of the 12 species, and these were combined to predict the assemblage expected at sites. The expected assemblage was compared to that observed using an observed over expected ratio (O/E). The models were evaluated using a number of internal tests including jackknifing, data partitioning, and the degree to which O/E values differed between reference sites and a set of sites perceived to be impaired by human impacts.     

Components of the Total Water Balance of an Urban Catchment

A daily model was used to quantify the components of the total urban water balance of the Curtin catchment, Canberra, Australia. For this catchment, the mean annual rainfall was found to be three times greater than imported potable water, and the sum of the output from the separate stormwater and wastewater systems exceeded the input of imported potable water by some 50%. Seasonal and annual variations in climate exert a very strong influence over the relative magnitude of the water balance components; this needs to be accounted for when assessing the potential for utilizing stormwater and wastewater within an urban catchment.